目錄
- 一、創建redis docker基礎鏡像
- 二、制作redis節點鏡像
- 三、運行redis集群
- 引用：
摘要：接觸docker以來，似乎養成了一種習慣，安裝什么應用軟件都想往docker方向做，今天就想來嘗試下使用docker搭建redis集群。
首先，我們需要理論知識：Redis Cluster是Redis的分布式解決方案，它解決了redis單機中心化的問題，分布式數據庫——首要解決把整個數據集按照分區規則映射到多個節點的問題。
這邊就需要知道分區規則——哈希分區規則。Redis Cluster 采用哈希分區規則中的虛擬槽分區。所有的鍵根據哈希函數映射到0 ～ 16383，計算公式：slot = CRC16(key)&16383。每一個節點負責維護一部分槽以及槽所映射的鍵值數據。
一、創建redis docker基礎鏡像
下載redis安裝包，使用版本為：4.0.1
[root@etcd1 tmp]# mkdir docker_redis_cluster
[root@etcd1 tmp]# cd docker_redis_cluster/
[root@etcd2 docker_redis_cluster]# wget http://download.redis.io/releases/redis-4.0.1.tar.gz
解壓編譯redis
[root@etcd1 docker_redis_cluster]# tar zxvf redis-4.0.1.tar.gz
[root@etcd1 docker_redis_cluster]# cd redis-4.0.1/
[root@etcd1 redis-4.0.1]# make
修改redis配置
[root@etcd3 redis-4.0.1]# vi /tmp/docker_redis_cluster/redis-4.0.1/redis.conf
修改bind ip地址
# ~~~ WARNING ~~~ If the computer running Redis is directly exposed to the
# internet, binding to all the interfaces is dangerous and will expose the
# instance to everybody on the internet. So by default we uncomment the
# following bind directive, that will force Redis to listen only into
# the IPv4 lookback interface address (this means Redis will be able to
# accept connections only from clients running into the same computer it
# is running).
#
# IF YOU ARE SURE YOU WANT YOUR INSTANCE TO LISTEN TO ALL THE INTERFACES
# JUST COMMENT THE FOLLOWING LINE.
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#bind 127.0.0.1
bind 0.0.0.0
將守護進程yes改成no
# By default Redis does not run as a daemon. Use 'yes' if you need it.
# Note that Redis will write a pid file in /var/run/redis.pid when daemonized.
daemonize no
將密碼項注釋去掉，添加新密碼
# Warning: since Redis is pretty fast an outside user can try up to
# 150k passwords per second against a good box. This means that you should
# use a very strong password otherwise it will be very easy to break.
#
# requirepass foobared
修改為
# Warning: since Redis is pretty fast an outside user can try up to
# 150k passwords per second against a good box. This means that you should
# use a very strong password otherwise it will be very easy to break.
#
requirepass 123456
因為配置了密碼，所以，配置中另外一處主從連接也需要配置密碼
# If the master is password protected (using the "requirepass" configuration
# directive below) it is possible to tell the slave to authenticate before
# starting the replication synchronization process, otherwise the master will
# refuse the slave request.
#
# masterauth <master-password>
修改為
# If the master is password protected (using the "requirepass" configuration
# directive below) it is possible to tell the slave to authenticate before
# starting the replication synchronization process, otherwise the master will
# refuse the slave request.
#
# masterauth <master-password>
masterauth 123456
設置日志路徑
# Specify the log file name. Also the empty string can be used to force
# Redis to log on the standard output. Note that if you use standard
# output for logging but daemonize, logs will be sent to /dev/null
logfile "/var/log/redis/redis-server.log"
配置集群相關信息，去掉配置項前面的注釋
# Normal Redis instances can't be part of a Redis Cluster; only nodes that are
# started as cluster nodes can. In order to start a Redis instance as a
# cluster node enable the cluster support uncommenting the following:
#
cluster-enabled yes
# Every cluster node has a cluster configuration file. This file is not
# intended to be edited by hand. It is created and updated by Redis nodes.
# Every Redis Cluster node requires a different cluster configuration file.
# Make sure that instances running in the same system do not have
# overlapping cluster configuration file names.
#
cluster-config-file nodes-6379.conf
# Cluster node timeout is the amount of milliseconds a node must be unreachable
# for it to be considered in failure state.
# Most other internal time limits are multiple of the node timeout.
#
cluster-node-timeout 15000
鏡像制作
[root@etcd3 docker_redis_cluster]# cd /tmp/docker_redis_cluster
[root@etcd3 docker_redis_cluster]# vi Dockerfile
# Redis
# Version 4.0.1
FROM Centos:7<br>
ENV REDIS_HOME /usr/local<br>
ADD redis-4.0.1.tar.gz / # 本地的redis源碼包復制到鏡像的根路徑下，ADD命令會在復制過后自動解包。被復制的對象必須處于Dockerfile同一路徑，且ADD后面必須使用相對路徑
RUN mkdir -p $REDIS_HOME/redis # 創建安裝目錄
ADD redis-4.0.1/redis.conf $REDIS_HOME/redis/ # 將一開始編譯產生并修改后的配置復制到安裝目錄
RUN yum -y update # 更新yum源
RUN yum install -y gcc make # 安裝編譯需要的工具
WORKDIR /redis-4.0.1
RUN make
RUN mv /redis-4.0.1/src/redis-server $REDIS_HOME/redis/ # 編譯后，容器中只需要可執行文件redis-server
WORKDIR /
RUN rm -rf /redis-4.0.1 # 刪除解壓文件
RUN yum remove -y gcc make # 安裝編譯完成之后，可以刪除多余的gcc跟make
VOLUME ["/var/log/redis"] # 添加數據卷
EXPOSE 6379 # 暴露6379端口，也可以暴露多個端口，這里不需要如此
PS.當前鏡像非可執行鏡像，所以沒有包含ENTRYPOINT和CMD指令
構建鏡像
# 切換中國源
[root@etcd3 docker_redis_cluster]# vi /etc/docker/daemon.json
{
"registry-mirrors": ["https://registry.docker-cn.com"]
}
# 編譯
[root@etcd3 docker_redis_cluster]# docker build -t hakimdstx/cluster-redis .
...
Complete!
---> 546cb1d34f35
Removing intermediate container 6b6556c5f28d
Step 14/15 : VOLUME /var/log/redis
---> Running in 05a6642e4046
---> e7e2fb8676b2
Removing intermediate container 05a6642e4046
Step 15/15 : EXPOSE 6379
---> Running in 5d7abe1709e2
---> 2d1322475f79
Removing intermediate container 5d7abe1709e2
Successfully built 2d1322475f79
鏡像制作完成，制作中間可能會報： Public key for glibc-headers-2.17-222.el7.x86_64.rpm is not installed 錯誤，這時候需要在鏡像配置中添加一句命令：
...
RUN rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
RUN yum -y update # 更新yum源
RUN yum install -y gcc make # 安裝編譯需要的工具
查看鏡像：
[root@etcd3 docker_redis_cluster]# docker images
REPOSITORY TAG IMAGE ID CREATED SIZE
hakimdstx/cluster-redis 4.0.1 1fca5a08a4c7 14 seconds ago 435 MB
centos 7 49f7960eb7e4 2 days ago 200 MB
以上，redis 基礎鏡像就制作完成了
二、制作redis節點鏡像
基于此前制作的redis基礎鏡像創建一個redis節點鏡像
[root@etcd3 tmp]# mkdir docker_redis_nodes
[root@etcd3 tmp]# cd docker_redis_nodes
[root@etcd3 docker_redis_nodes]# vi Dockerfile
# Redis Node
# Version 4.0.1<br>
FROM hakimdstx/cluster-redis:4.0.1
# MAINTAINER_INFO
MAINTAINER hakim 1194842583@qq.com
ENTRYPOINT ["/usr/local/redis/redis-server", "/usr/local/redis/redis.conf"]
構建redis節點鏡像
[root@etcd3 docker_redis_nodes]# docker build -t hakimdstx/nodes-redis:4.0.1 .
Sending build context to Docker daemon 2.048 kB
Step 1/3 : FROM hakimdstx/cluster-redis:4.0.1
---> 1fca5a08a4c7
Step 2/3 : MAINTAINER hakim 1194842583@qq.com
---> Running in cc6e07eb2c36
---> 55769d3bfacb
Removing intermediate container cc6e07eb2c36
Step 3/3 : ENTRYPOINT /usr/local/redis/redis-server /usr/local/redis/redis.conf
---> Running in f5dedf88f6f6
---> da64da483559
Removing intermediate container f5dedf88f6f6
Successfully built da64da483559
查看鏡像
[root@etcd3 docker_redis_nodes]# docker images
REPOSITORY TAG IMAGE ID CREATED SIZE
hakimdstx/nodes-redis 4.0.1 da64da483559 51 seconds ago 435 MB
hakimdstx/cluster-redis 4.0.1 1fca5a08a4c7 9 minutes ago 435 MB
centos 7 49f7960eb7e4 2 days ago 200 MB
三、運行redis集群
運行redis容器
[root@etcd3 docker_redis_nodes]# docker run -d --name redis-6379 -p 6379:6379 hakimdstx/nodes-redis:4.0.1
1673a7d859ea83257d5bf14d82ebf717fb31405c185ce96a05f597d8f855aa7d
[root@etcd3 docker_redis_nodes]# docker run -d --name redis-6380 -p 6380:6379 hakimdstx/nodes-redis:4.0.1
df6ebce6f12a6f3620d5a29adcfbfa7024e906c3af48f21fa7e1fa524a361362
[root@etcd3 docker_redis_nodes]# docker run -d --name redis-6381 -p 6381:6379 hakimdstx/nodes-redis:4.0.1
396e174a1d9235228b3c5f0266785a12fb1ea49efc7ac755c9e7590e17aa1a79
[root@etcd3 docker_redis_nodes]# docker run -d --name redis-6382 -p 6382:6379 hakimdstx/nodes-redis:4.0.1
d9a71dd3f969094205ffa7596c4a04255575cdd3acca2d47fe8ef7171a3be528
[root@etcd3 docker_redis_nodes]# docker run -d --name redis-6383 -p 6383:6379 hakimdstx/nodes-redis:4.0.1
73e4f843d8cb28595456e21b04f97d18ce1cdf8dc56d1150844ba258a3781933
[root@etcd3 docker_redis_nodes]# docker run -d --name redis-6384 -p 6384:6379 hakimdstx/nodes-redis:4.0.1
10c62aafa4dac47220daf5bf3cec84406f086d5261599b54ec6c56bb7da97d6d
查看容器信息
[root@etcd3 redis]# docker ps
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
10c62aafa4da hakimdstx/nodes-redis:4.0.1 "/usr/local/redis/..." 3 seconds ago Up 2 seconds 0.0.0.0:6384->6379/tcp redis-6384
73e4f843d8cb hakimdstx/nodes-redis:4.0.1 "/usr/local/redis/..." 12 seconds ago Up 10 seconds 0.0.0.0:6383->6379/tcp redis-6383
d9a71dd3f969 hakimdstx/nodes-redis:4.0.1 "/usr/local/redis/..." 20 seconds ago Up 18 seconds 0.0.0.0:6382->6379/tcp redis-6382
396e174a1d92 hakimdstx/nodes-redis:4.0.1 "/usr/local/redis/..." 3 days ago Up 3 days 0.0.0.0:6381->6379/tcp redis-6381
df6ebce6f12a hakimdstx/nodes-redis:4.0.1 "/usr/local/redis/..." 3 days ago Up 3 days 0.0.0.0:6380->6379/tcp redis-6380
1673a7d859ea hakimdstx/nodes-redis:4.0.1 "/usr/local/redis/..." 3 days ago Up 3 days 0.0.0.0:6379->6379/tcp redis-6379
運行 redis 集群容器
通過遠程連接，查看redis info replication 信息
[root@etcd2 ~]# redis-cli -h 192.168.10.52 -p 6379
192.168.10.52:6379> info replication
NOAUTH Authentication required.
192.168.10.52:6379> auth 123456
OK
192.168.10.52:6379> info replication
# Replication
role:master
connected_slaves:0
master_replid:2f0a7b50aed699fa50a79f3f7f9751a070c50ee9
master_replid2:0000000000000000000000000000000000000000
master_repl_offset:0
second_repl_offset:-1
repl_backlog_active:0
repl_backlog_size:1048576
repl_backlog_first_byte_offset:0
repl_backlog_histlen:0
192.168.10.52:6379>
# 其余基本信息同上
可以看到，客戶連接之后，因為之前設置了密碼，所以需要先輸入密碼認證，否則就無法通過。以上信息，我們知道所有的redis都是master角色 role:master ，這顯然不是我們所希望的。
在配置之前我們需要查看所有容器當前的IP地址
[root@etcd3 redis]# docker ps
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
10c62aafa4da hakimdstx/nodes-redis:4.0.1 "/usr/local/redis/..." 3 seconds ago Up 2 seconds 0.0.0.0:6384->6379/tcp redis-6384
73e4f843d8cb hakimdstx/nodes-redis:4.0.1 "/usr/local/redis/..." 12 seconds ago Up 10 seconds 0.0.0.0:6383->6379/tcp redis-6383
d9a71dd3f969 hakimdstx/nodes-redis:4.0.1 "/usr/local/redis/..." 20 seconds ago Up 18 seconds 0.0.0.0:6382->6379/tcp redis-6382
396e174a1d92 hakimdstx/nodes-redis:4.0.1 "/usr/local/redis/..." 3 days ago Up 3 days 0.0.0.0:6381->6379/tcp redis-6381
df6ebce6f12a hakimdstx/nodes-redis:4.0.1 "/usr/local/redis/..." 3 days ago Up 3 days 0.0.0.0:6380->6379/tcp redis-6380
1673a7d859ea hakimdstx/nodes-redis:4.0.1 "/usr/local/redis/..." 3 days ago Up 3 days 0.0.0.0:6379->6379/tcp redis-6379
[root@etcd3 redis]#
[root@etcd3 redis]# docker inspect 10c62aafa4da 73e4f843d8cb d9a71dd3f969 396e174a1d92 df6ebce6f12a 1673a7d859ea | grep IPA
"SecondaryIPAddresses": null,
"IPAddress": "172.17.0.7",
"IPAMConfig": null,
"IPAddress": "172.17.0.7",
"SecondaryIPAddresses": null,
"IPAddress": "172.17.0.6",
"IPAMConfig": null,
"IPAddress": "172.17.0.6",
"SecondaryIPAddresses": null,
"IPAddress": "172.17.0.5",
"IPAMConfig": null,
"IPAddress": "172.17.0.5",
"SecondaryIPAddresses": null,
"IPAddress": "172.17.0.4",
"IPAMConfig": null,
"IPAddress": "172.17.0.4",
"SecondaryIPAddresses": null,
"IPAddress": "172.17.0.3",
"IPAMConfig": null,
"IPAddress": "172.17.0.3",
"SecondaryIPAddresses": null,
"IPAddress": "172.17.0.2",
"IPAMConfig": null,
"IPAddress": "172.17.0.2",
可以知道： redis-6379：172.17.0.2，redis-6380：172.17.0.3，redis-6381：172.17.0.4，redis-6382：172.17.0.5，redis-6383：172.17.0.6，redis-6384：172.17.0.7
配置redis
ert
Redis Cluster 的集群感知操作
//集群(cluster)
CLUSTER INFO 打印集群的信息
CLUSTER NODES 列出集群當前已知的所有節點（node），以及這些節點的相關信息。
//節點(node)
CLUSTER MEET <ip> <port> 將 ip 和 port 所指定的節點添加到集群當中，讓它成為集群的一份子。
CLUSTER FORGET <node_id> 從集群中移除 node_id 指定的節點。
CLUSTER REPLICATE <node_id> 將當前節點設置為 node_id 指定的節點的從節點。
CLUSTER SAVECONFIG 將節點的配置文件保存到硬盤里面。
//槽(slot)
CLUSTER ADDSLOTS <slot> [slot ...] 將一個或多個槽（slot）指派（assign）給當前節點。
CLUSTER DELSLOTS <slot> [slot ...] 移除一個或多個槽對當前節點的指派。
CLUSTER FLUSHSLOTS 移除指派給當前節點的所有槽，讓當前節點變成一個沒有指派任何槽的節點。
CLUSTER SETSLOT <slot> NODE <node_id> 將槽 slot 指派給 node_id 指定的節點，如果槽已經指派給另一個節點，那么先讓另一個節點刪除該槽>，然后再進行指派。
CLUSTER SETSLOT <slot> MIGRATING <node_id> 將本節點的槽 slot 遷移到 node_id 指定的節點中。
CLUSTER SETSLOT <slot> IMPORTING <node_id> 從 node_id 指定的節點中導入槽 slot 到本節點。
CLUSTER SETSLOT <slot> STABLE 取消對槽 slot 的導入（import）或者遷移（migrate）。
//鍵 (key)
CLUSTER KEYSLOT <key> 計算鍵 key 應該被放置在哪個槽上。
CLUSTER COUNTKEYSINSLOT <slot> 返回槽 slot 目前包含的鍵值對數量。
CLUSTER GETKEYSINSLOT <slot> <count> 返回 count 個 slot 槽中的鍵。
redis 集群感知：節點握手——是指一批運行在集群模式的節點通過Gossip協議彼此通信，達到感知對方的過程。
192.168.10.52:6379> CLUSTER MEET 172.17.0.3 6379
OK
192.168.10.52:6379> CLUSTER MEET 172.17.0.4 6379
OK
192.168.10.52:6379> CLUSTER MEET 172.17.0.5 6379
OK
192.168.10.52:6379> CLUSTER MEET 172.17.0.6 6379
OK
192.168.10.52:6379> CLUSTER MEET 172.17.0.7 6379
OK
192.168.10.52:6379> CLUSTER NODES
54cb5c2eb8e5f5aed2d2f7843f75a9284ef6785c 172.17.0.3:6379@16379 master - 0 1528697195600 1 connected
f45f9109f2297a83b1ac36f9e1db5e70bbc174ab 172.17.0.4:6379@16379 master - 0 1528697195600 0 connected
ae86224a3bc29c4854719c83979cb7506f37787a 172.17.0.7:6379@16379 master - 0 1528697195600 5 connected
98aebcfe42d8aaa8a3375e4a16707107dc9da683 172.17.0.6:6379@16379 master - 0 1528697194000 4 connected
0bbdc4176884ef0e3bb9b2e7d03d91b0e7e11f44 172.17.0.5:6379@16379 master - 0 1528697194995 3 connected
760e4d0039c5ac13d04aa4791c9e6dc28544d7c7 172.17.0.2:6379@16379 myself,master - 0 1528697195000 2 connected
當前已經使這六個節點組成集群，但是現在還無法工作，因為集群節點還沒有分配槽（slot）。
分配槽信息
查看172.17.0.2:6379 的槽個數
192.168.10.52:6379> CLUSTER INFO
cluster_state:fail
cluster_slots_assigned:0 # 被分配槽的個數為0
cluster_slots_ok:0
cluster_slots_pfail:0
cluster_slots_fail:0
cluster_known_nodes:6
cluster_size:0
cluster_current_epoch:5
cluster_my_epoch:2
cluster_stats_messages_ping_sent:260418
cluster_stats_messages_pong_sent:260087
cluster_stats_messages_meet_sent:10
cluster_stats_messages_sent:520515
cluster_stats_messages_ping_received:260086
cluster_stats_messages_pong_received:260328
cluster_stats_messages_meet_received:1
cluster_stats_messages_received:520415
上面看到集群狀態是失敗的，原因是槽位沒有分配，而且需要一次性把16384個槽位完全分配了，集群才可用。
分配槽位
分配槽位： CLUSTER ADDSLOTS 槽位，一個槽位只能分配一個節點，16384個槽位必須分配完，不同節點不能沖突。
所以通過腳本進行分配 addslots.sh：
#!/bin/bash
# node1 192.168.10.52 172.17.0.2
n=0
for ((i=n;i<=5461;i++))
do
/usr/local/bin/redis-cli -h 192.168.10.52 -p 6379 -a 123456 CLUSTER ADDSLOTS $i
done
# node2 192.168.10.52 172.17.0.3
n=5462
for ((i=n;i<=10922;i++))
do
/usr/local/bin/redis-cli -h 192.168.10.52 -p 6380 -a 123456 CLUSTER ADDSLOTS $i
done
# node3 192.168.10.52 172.17.0.4
n=10923
for ((i=n;i<=16383;i++))
do
/usr/local/bin/redis-cli -h 192.168.10.52 -p 6381 -a 123456 CLUSTER ADDSLOTS $i
done
其中， -a 123456 表示需要輸入的密碼。
192.168.10.52:6379> CLUSTER INFO
cluster_state:fail # 集群狀態為失敗
cluster_slots_assigned:16101 # 沒有完全分配結束
cluster_slots_ok:16101
cluster_slots_pfail:0
cluster_slots_fail:0
cluster_known_nodes:6
cluster_size:3
cluster_current_epoch:5
cluster_my_epoch:2
cluster_stats_messages_ping_sent:266756
cluster_stats_messages_pong_sent:266528
cluster_stats_messages_meet_sent:10
cluster_stats_messages_sent:533294
cluster_stats_messages_ping_received:266527
cluster_stats_messages_pong_received:266666
cluster_stats_messages_meet_received:1
cluster_stats_messages_received:533194<br>
192.168.10.52:6379> CLUSTER INFO
cluster_state:ok # 集群狀態為成功
cluster_slots_assigned:16384 # 已經全部分配完成
cluster_slots_ok:16384
cluster_slots_pfail:0
cluster_slots_fail:0
cluster_known_nodes:6
cluster_size:3
cluster_current_epoch:5
cluster_my_epoch:2
cluster_stats_messages_ping_sent:266757
cluster_stats_messages_pong_sent:266531
cluster_stats_messages_meet_sent:10
cluster_stats_messages_sent:533298
cluster_stats_messages_ping_received:266530
cluster_stats_messages_pong_received:266667
cluster_stats_messages_meet_received:1
cluster_stats_messages_received:533198
綜上可知，當全部槽位分配完成之后，集群還是可行的，如果我們手欠，移除一個槽位，那么集群就立馬那不行了，自己去試試吧 ——CLUSTER DELSLOTS 0 。
如何變成高可用性
以上我們已經搭建了一套完整的可運行的redis cluster，但是每個節點都是單點，這樣子可能出現，一個節點掛掉，整個集群因為槽位分配不完全而崩潰，因此，我們需要為每個節點配置副本備用節點。
前面我們已經提前創建了6個備用節點，搭建集群花了三個，因此還有剩下三個直接可以用來做備用副本。
192.168.10.52:6379> CLUSTER INFO
cluster_state:ok
cluster_slots_assigned:16384
cluster_slots_ok:16384
cluster_slots_pfail:0
cluster_slots_fail:0
cluster_known_nodes:6 # 總共6個節點
cluster_size:3 # 集群為 3 個節點
cluster_current_epoch:5
cluster_my_epoch:2
cluster_stats_messages_ping_sent:270127
cluster_stats_messages_pong_sent:269893
cluster_stats_messages_meet_sent:10
cluster_stats_messages_sent:540030
cluster_stats_messages_ping_received:269892
cluster_stats_messages_pong_received:270037
cluster_stats_messages_meet_received:1
cluster_stats_messages_received:539930
查看所有節點的id
192.168.10.52:6379> CLUSTER NODES
54cb5c2eb8e5f5aed2d2f7843f75a9284ef6785c 172.17.0.3:6379@16379 master - 0 1528704114535 1 connected 5462-10922
f45f9109f2297a83b1ac36f9e1db5e70bbc174ab 172.17.0.4:6379@16379 master - 0 1528704114000 0 connected 10923-16383
ae86224a3bc29c4854719c83979cb7506f37787a 172.17.0.7:6379@16379 master - 0 1528704114023 5 connected
98aebcfe42d8aaa8a3375e4a16707107dc9da683 172.17.0.6:6379@16379 master - 0 1528704115544 4 connected
0bbdc4176884ef0e3bb9b2e7d03d91b0e7e11f44 172.17.0.5:6379@16379 master - 0 1528704114836 3 connected
760e4d0039c5ac13d04aa4791c9e6dc28544d7c7 172.17.0.2:6379@16379 myself,master - 0 1528704115000 2 connected 0-5461
編寫腳本，添加副本節點
[root@etcd2 tmp]# vi addSlaveNodes.sh
#!/bin/bash
/usr/local/bin/redis-cli -h 192.168.10.52 -p 6382 -a 123456 CLUSTER REPLICATE 760e4d0039c5ac13d04aa4791c9e6dc28544d7c7
/usr/local/bin/redis-cli -h 192.168.10.52 -p 6383 -a 123456 CLUSTER REPLICATE 54cb5c2eb8e5f5aed2d2f7843f75a9284ef6785c
/usr/local/bin/redis-cli -h 192.168.10.52 -p 6384 -a 123456 CLUSTER REPLICATE f45f9109f2297a83b1ac36f9e1db5e70bbc174ab
注意：1、作為備用的節點，必須是未分配槽位的，否者會操作失敗 (error) ERR To set a master the node must be empty and without assigned slots 。
2、需要從需要添加的節點上面執行操作，CLUSTER REPLICATE [node_id] ，使當前節點成為 node_id 的副本節點。
3、添加從節點（集群復制）： 復制的原理和單機的Redis復制原理一樣，區別是：集群下的從節點也需要運行在cluster模式下，要先添加到集群里面，再做復制。
查看所有節點信息：
192.168.10.52:6379> CLUSTER NODES
54cb5c2eb8e5f5aed2d2f7843f75a9284ef6785c 172.17.0.3:6379@16379 master - 0 1528705604149 1 connected 5462-10922
f45f9109f2297a83b1ac36f9e1db5e70bbc174ab 172.17.0.4:6379@16379 master - 0 1528705603545 0 connected 10923-16383
ae86224a3bc29c4854719c83979cb7506f37787a 172.17.0.7:6379@16379 slave f45f9109f2297a83b1ac36f9e1db5e70bbc174ab 0 1528705603144 5 connected
98aebcfe42d8aaa8a3375e4a16707107dc9da683 172.17.0.6:6379@16379 slave 54cb5c2eb8e5f5aed2d2f7843f75a9284ef6785c 0 1528705603000 4 connected
0bbdc4176884ef0e3bb9b2e7d03d91b0e7e11f44 172.17.0.5:6379@16379 slave 760e4d0039c5ac13d04aa4791c9e6dc28544d7c7 0 1528705603000 3 connected
760e4d0039c5ac13d04aa4791c9e6dc28544d7c7 172.17.0.2:6379@16379 myself,master - 0 1528705602000 2 connected 0-5461
可以看到我們現在實現了三主三從的一個高可用集群。
高可用測試——故障轉移
查看當前運行狀態：
192.168.10.52:6379> CLUSTER NODES
54cb5c2eb8e5f5aed2d2f7843f75a9284ef6785c 172.17.0.3:6379@16379 master - 0 1528705604149 1 connected 5462-10922
f45f9109f2297a83b1ac36f9e1db5e70bbc174ab 172.17.0.4:6379@16379 master - 0 1528705603545 0 connected 10923-16383
ae86224a3bc29c4854719c83979cb7506f37787a 172.17.0.7:6379@16379 slave f45f9109f2297a83b1ac36f9e1db5e70bbc174ab 0 1528705603144 5 connected
98aebcfe42d8aaa8a3375e4a16707107dc9da683 172.17.0.6:6379@16379 slave 54cb5c2eb8e5f5aed2d2f7843f75a9284ef6785c 0 1528705603000 4 connected
0bbdc4176884ef0e3bb9b2e7d03d91b0e7e11f44 172.17.0.5:6379@16379 slave 760e4d0039c5ac13d04aa4791c9e6dc28544d7c7 0 1528705603000 3 connected
760e4d0039c5ac13d04aa4791c9e6dc28544d7c7 172.17.0.2:6379@16379 myself,master - 0 1528705602000 2 connected 0-5461
以上，運行正常
嘗試關閉一個master，選擇端口為6380的容器，停掉之后：
192.168.10.52:6379> CLUSTER NODES
54cb5c2eb8e5f5aed2d2f7843f75a9284ef6785c 172.17.0.3:6379@16379 master,fail - 1528706408935 1528706408000 1 connected 5462-10922
f45f9109f2297a83b1ac36f9e1db5e70bbc174ab 172.17.0.4:6379@16379 master - 0 1528706463000 0 connected 10923-16383
ae86224a3bc29c4854719c83979cb7506f37787a 172.17.0.7:6379@16379 slave f45f9109f2297a83b1ac36f9e1db5e70bbc174ab 0 1528706462980 5 connected
98aebcfe42d8aaa8a3375e4a16707107dc9da683 172.17.0.6:6379@16379 slave 54cb5c2eb8e5f5aed2d2f7843f75a9284ef6785c 0 1528706463000 4 connected
0bbdc4176884ef0e3bb9b2e7d03d91b0e7e11f44 172.17.0.5:6379@16379 slave 760e4d0039c5ac13d04aa4791c9e6dc28544d7c7 0 1528706463985 3 connected
760e4d0039c5ac13d04aa4791c9e6dc28544d7c7 172.17.0.2:6379@16379 myself,master - 0 1528706462000 2 connected 0-5461
192.168.10.52:6379>
192.168.10.52:6379> CLUSTER INFO
cluster_state:fail
cluster_slots_assigned:16384
cluster_slots_ok:10923
cluster_slots_pfail:0
cluster_slots_fail:5461
cluster_known_nodes:6
cluster_size:3
cluster_current_epoch:5
cluster_my_epoch:2
cluster_stats_messages_ping_sent:275112
cluster_stats_messages_pong_sent:274819
cluster_stats_messages_meet_sent:10
cluster_stats_messages_fail_sent:5
cluster_stats_messages_sent:549946
cluster_stats_messages_ping_received:274818
cluster_stats_messages_pong_received:275004
cluster_stats_messages_meet_received:1
cluster_stats_messages_fail_received:1
cluster_stats_messages_received:549824
以上，發現整個集群都失敗了，從節點沒有自動升級為主節點，怎么回事？？
重啟停掉的容器，經排查日志信息 [root@df6ebce6f12a /]# tail -f /var/log/redis/redis-server.log ：
1:S 11 Jun 09:57:46.712 # Cluster state changed: ok
1:S 11 Jun 09:57:46.718 * (Non critical) Master does not understand REPLCONF listening-port: -NOAUTH Authentication required.
1:S 11 Jun 09:57:46.718 * (Non critical) Master does not understand REPLCONF capa: -NOAUTH Authentication required.
1:S 11 Jun 09:57:46.719 * Partial resynchronization not possible (no cached master)
1:S 11 Jun 09:57:46.719 # Unexpected reply to PSYNC from master: -NOAUTH Authentication required.
1:S 11 Jun 09:57:46.719 * Retrying with SYNC...
1:S 11 Jun 09:57:46.719 # MASTER aborted replication with an error: NOAUTH Authentication required.
1:S 11 Jun 09:57:46.782 * Connecting to MASTER 172.17.0.6:6379
1:S 11 Jun 09:57:46.782 * MASTER <-> SLAVE sync started
1:S 11 Jun 09:57:46.782 * Non blocking connect for SYNC fired the event.
可以看到，主從之間訪問需要auth，之前忘記了配置 redis.conf 中的 # masterauth <master-password> ，所以導致主從之間無法通訊。修改配置之后，自動故障轉移正常。
有時候需要實施人工故障轉移：
登錄6380端口的從節點：6383，執行 CLUSTER FAILOVER 命令：
192.168.10.52:6383> CLUSTER FAILOVER
(error) ERR Master is down or failed, please use CLUSTER FAILOVER FORCE
發現因為master已經down了，所以我們需要執行強制轉移
192.168.10.52:6383> CLUSTER FAILOVER FORCE
OK
查看當前 cluster node 情況：
192.168.10.52:6383> CLUSTER NODES
0bbdc4176884ef0e3bb9b2e7d03d91b0e7e11f44 172.17.0.5:6379@16379 slave 760e4d0039c5ac13d04aa4791c9e6dc28544d7c7 0 1528707535332 3 connected
ae86224a3bc29c4854719c83979cb7506f37787a 172.17.0.7:6379@16379 slave f45f9109f2297a83b1ac36f9e1db5e70bbc174ab 0 1528707534829 5 connected
f45f9109f2297a83b1ac36f9e1db5e70bbc174ab 172.17.0.4:6379@16379 master - 0 1528707534527 0 connected 10923-16383
98aebcfe42d8aaa8a3375e4a16707107dc9da683 172.17.0.6:6379@16379 myself,master - 0 1528707535000 6 connected 5462-10922
760e4d0039c5ac13d04aa4791c9e6dc28544d7c7 172.17.0.2:6379@16379 master - 0 1528707535834 2 connected 0-5461
54cb5c2eb8e5f5aed2d2f7843f75a9284ef6785c 172.17.0.3:6379@16379 master,fail - 1528707472833 1528707472000 1 connected
從節點已經升級為master節點。這時候，我們嘗試重啟了，6380節點的redis（其實是重新啟動停掉的容器）：
192.168.10.52:6383> CLUSTER NODES
0bbdc4176884ef0e3bb9b2e7d03d91b0e7e11f44 172.17.0.5:6379@16379 slave 760e4d0039c5ac13d04aa4791c9e6dc28544d7c7 0 1528707556044 3 connected
ae86224a3bc29c4854719c83979cb7506f37787a 172.17.0.7:6379@16379 slave f45f9109f2297a83b1ac36f9e1db5e70bbc174ab 0 1528707555000 5 connected
f45f9109f2297a83b1ac36f9e1db5e70bbc174ab 172.17.0.4:6379@16379 master - 0 1528707556000 0 connected 10923-16383
98aebcfe42d8aaa8a3375e4a16707107dc9da683 172.17.0.6:6379@16379 myself,master - 0 1528707556000 6 connected 5462-10922
760e4d0039c5ac13d04aa4791c9e6dc28544d7c7 172.17.0.2:6379@16379 master - 0 1528707556000 2 connected 0-5461
54cb5c2eb8e5f5aed2d2f7843f75a9284ef6785c 172.17.0.3:6379@16379 slave 98aebcfe42d8aaa8a3375e4a16707107dc9da683 0 1528707556547 6 connected
我們發現，6380節點反而變成了 6383節點的從節點。
現在集群應該是完整的了，所以，集群狀態應該已經恢復了，我們查看下：
192.168.10.52:6383> CLUSTER INFO
cluster_state:ok
cluster_slots_assigned:16384
cluster_slots_ok:16384
cluster_slots_pfail:0
cluster_slots_fail:0
cluster_known_nodes:6
cluster_size:3
cluster_current_epoch:6
cluster_my_epoch:6
cluster_stats_messages_ping_sent:19419
cluster_stats_messages_pong_sent:19443
cluster_stats_messages_meet_sent:1
cluster_stats_messages_auth-req_sent:5
cluster_stats_messages_update_sent:1
cluster_stats_messages_sent:38869
cluster_stats_messages_ping_received:19433
cluster_stats_messages_pong_received:19187
cluster_stats_messages_meet_received:5
cluster_stats_messages_fail_received:4
cluster_stats_messages_auth-ack_received:2
cluster_stats_messages_received:38631
OK，沒有問題。
集群訪問
客戶端在初始化的時候只需要知道一個節點的地址即可，客戶端會先嘗試向這個節點執行命令，比如 get key ，如果key所在的slot剛好在該節點上，則能夠直接執行成功。如果slot不在該節點，則節點會返回MOVED錯誤，同時把該slot對應的節點告訴客戶端，客戶端可以去該節點執行命令
192.168.10.52:6383> get hello
(error) MOVED 866 172.17.0.2:6379
192.168.10.52:6379> set number 20004
(error) MOVED 7743 172.17.0.3:6379
另外，redis集群版只使用db0，select命令雖然能夠支持select 0。其他的db都會返回錯誤。
192.168.10.52:6383> select 0
OK
192.168.10.52:6383> select 1
(error) ERR SELECT is not allowed in cluster mode
近期，有網友詢問docker redis集群連接報錯的問題，具體報錯如下：
初步認為是，node節點沒有全部添加進去，添加之后，依然有上述問題。想到是跨主機訪問，應該是路由尋址不了導致的。當初寫上述教程的時候，docker是以默認的網絡模式bridge模式運行的，畢竟當初是以學習整理文檔為主，主要是單機訪問。但是，實際應用化場景中，多是公網跨主機訪問，問題明朗了，想著集群這東西最好還是設置成共享主機公網ip比較好，于是解決如下：
- 在docker運行時，執行網絡模式為：host。
- 端口沖突解決，畢竟host模式下，容器會占用宿主機的端口，于是，我們就從配置下手，在宿主機上生成配置redis-60001.conf,redis-60002.conf,redis-60003.conf...，有多少端口建多少個文件，最終運行一個容器，掛載一個配置到容器中用于覆蓋主機中的配置。
最終的運行方式如下：
docker run -d --name redis-6380 --net host -v /tmp/redis.conf:/usr/local/redis/redis.conf hakimdstx/nodes-redis:4.0.1
至此，網絡問題得到解決。
PS.生產環境需要注意防火墻問題，不然也是會報錯的?！ ?/p>
引用：
1、Redis Cluster部署、管理和測試
2、Docker下redis的主從、持久化配置
到此這篇關于docker實現redis集群搭建的方法步驟的文章就介紹到這了,更多相關docker redis集群搭建內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！
