到終端里進行配置。在終端里輸入adsl-setup [root@localhost root]# adsl-setup Welcome to the ADSL client setup. First, I will run some checks on system to make sure the PPPoE client is installed properly… LOGIN NAME Enter your Login Name (default root): (username) ‘此處輸入ADSL的用戶名。 INTERFACE Enter the Ethernet interface connected to the ADSL modem For Solaris, this is likely to be something like /dev/hme0. For Linux, it will be ethX, where ‘X’ is a number. (default eth0): ‘直接用默認的eth0就行了。 Do you want the link to come up on demand, or stay up continuously? If you want it to come up on demand, enter the idle time in seconds after which the link should be dropped. If you want the link to stay up permanently, enter ‘no’ (two letters, lower-case.) NOTE: Demand-activated links do not interact well with dynamic IP addresses. You may have some problems with demand-activated links. Enter the demand value (default no): ‘輸默認的NO DNS Please enter the IP address of your ISP’s primary DNS server. If your ISP claims that ‘the server will provide dynamic DNS addresses’, enter ‘server’ (all lower-case) here. ’DNS地址，南京地區的主DNS為218.2.135.1，輔DNS為61.147.37.1其它地區可參照當?shù)豂SP If you just press enter, I will assume you know what you are doing and not modify your DNS setup. Enter the DNS information here: server PASSWORD ‘輸入ADSL密碼，默認為自己的電話號碼 Please enter your Password: ’再次輸入密碼 Please re-enter your Password: USERCTRL Please enter ‘yes’ (two letters, lower-case.) if you want to allow normal user to start or stop DSL connection (default yes): y ‘是否允許普通用戶開啟或關閉ADSL連接，默認允許。 FIREWALLING Please choose the firewall rules to use. Note that these rules are very basic. You are strongly encouraged to use a more sophisticated firewall setup; however, these will provide basic security. If you are running any servers on your machine, you must choose ‘NONE’ and set up firewalling yourself. Otherwise, the firewall rules will deny access to all standard servers like Web, e-mail, ftp, etc. If you are using SSH, the rules will block outgoing SSH connections which allocate a privileged source port. ’選擇防火墻的等級，0到2，按需要選。 The firewall choices are: 0 - NONE: This script will not set any firewall rules. You are responsible for ensuring the security of your machine. You are STRONGLY recommended to use some kind of firewall rules. 1 - STANDALONE: Appropriate for a basic stand-alone web-surfing workstation 2 - MASQUERADE: Appropriate for a machine acting as an Internet gateway for a LAN Choose a type of firewall (0-2): 0 Start this connection at boot time Do you want to start this connection at boot time? ‘是否在啟動時自動連接？ Please enter no or yes (default no):y ** Summary of what you entered ** ’以下是ADSL賬號設置信息 Ethernet Interface: eth0 User name: nj007.cn Activate-on-demand: No DNS addresses: Supplied by ISP’s server Firewalling: NONE User Control: y Accept these settings and adjust configuration files (y/n)? y ‘以上信息正確嗎，Y保存，N重填。 Adjusting /etc/sysconfig/network-scripts/ifcfg-ppp0 Adjusting /etc/ppp/chap-secrets and /etc/ppp/pap-secrets (But first backing it up to /etc/ppp/chap-secrets.bak) (But first backing it up to /etc/ppp/pap-secrets.bak) Congratulations, it should be all set up! Type ‘/sbin/ifup ppp0′ to bring up your xDSL link and ‘/sbin/ifdown ppp0′ to bring it down. Type ‘/sbin/adsl-status /etc/sysconfig/network-scripts/ifcfg-ppp0′ to see the link status.
已經完成配置ADSL寬帶連接，接下來，重啟LINUX即可。命令reboot或者shutdown -r now
巨人網絡通訊聲明：本文標題《linux配置上網 linux adsl撥號上網設置》，本文關鍵詞 ；如發現本文內容存在版權問題，煩請?zhí)峁┫嚓P信息告之我們，我們將及時溝通與處理。本站內容系統采集于網絡，涉及言論、版權與本站無關。
