寫個設置命令的VBS腳本代碼

'作者：劉先勇 (Eric Liu)
'將以下代碼復制并保存為"系統命令.VBS"，并運行安裝。
'安裝成功后，可通過在程序、文件或文件夾上點右鍵->發送到->系統命令來設置一個命令，然后在運行中就可以輸入該命令打開文件了。
'腳本運行一次后在右鍵菜單中增加從這里運行CMD的快捷方式，還增加查找目標文件快捷方式

'On Error Resume Next
If (lcase(right(wscript.fullname,11))>"wscript.exe") then
set objShell=createObject("wscript.shell")
objShell.Run("Wscript //nologo "chr(34)wscript.scriptfullnamechr(34))
Wscript.Quit
end if

Set pCmd=CreateObject("WScript.Shell")
Set pFso=CreateObject("Scripting.FileSystemObject")
Set pShell = CreateObject("Shell.Application")
Set pSysEnv = CreateObject("WScript.Shell").Environment("system")
strComputer = "."
Set pWMIService = GetObject("winmgmts:\\" strComputer "\root\cimv2")

Function LGetPath(pFile)
iLastSepPos = InstrRev(pFile, "\", -1, 1)
If iLastSepPos = 0 Then
LGetPath=""
Exit Function
Else
LGetPath = Left(pFile, iLastSepPos-1)
End If
End Function

Function GetLnkTarget(linkPath)
linkPath=Replace(linkPath, "\", "\\")
Set pFiles = pWMIService.ExecQuery("Select * From Win32_ShortcutFile WHERE Name = " "'" linkPath "'")
For Each pFile in pFiles
GetLnkTarget=pFile.Target
Exit For
Next
End Function

Function ListSysCmd(pFileName)
SysCmdPath=pCmd.RegRead("HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders\SysCmd")
Set pFolder = pFso.GetFolder(SysCmdPath)
Set pFile = pFso.OpenTextFile(pFileName, 2, True)

For Each file in pFolder.Files
linkPath=SysCmdPath "\" file.name
IF UCASE(Right(file.name, 4))=".LNK" Then
Set lnkFiles = pWMIService.ExecQuery("Select * From Win32_ShortcutFile WHERE Name = " "'" Replace(linkPath, "\", "\\") "'")
For Each lnkFile in lnkFiles
pFile.WriteLine(linkPath " " lnkFile.Target)
Next
Else
pFile.WriteLine linkPath
End IF
Next
End Function

Function GetConfigPath
Set pFolder = pShell.BrowseForFolder(0, "請選擇一個目錄:", 0, "::{20D04FE0-3AEA-1069-A2D8-08002B30309D}")
If pFolder Is Nothing Then
Wscript.Quit
End If
Set pFolderItem = pFolder.Self
GetConfigPath = pFolderItem.Path
End Function

Sub SetEnv(pPath, pValue)
If pValue="" Then
pSysEnv.Remove(pPath)
Else
pSysEnv(pPath) = pValue
End IF
End Sub

Function GetEnv(pPath)
GetEnv = pSysEnv(pPath)
End Function

'判斷一個字符串是否匹配一個正則表達式
' ^\w+[@]\w+[.]\w+$ E-Mail地址
' ^[0-9-]+$ 數字
Function IsMatch(Str, Patrn)
Set r = new RegExp
r.Pattern = Patrn
IsMatch = r.test(Str)
End Function

Sub AddNewCmd(pShortCutName, pTargetPath, pCmdLocation)
IF pShortCutName>"" Then
LinkDir = pCmdLocation
Set pCmdLink = pCmd.CreateShortcut(LinkDir "\" pShortCutName ".lnk")
pCmdLink.TargetPath = pTargetPath
pCmdLink.WindowStyle = 1
pCmdLink.Hotkey = ""
pCmdLink.IconLocation = "%systemroot%\system32\shell32.dll,146"
pCmdLink.Description = "Shortcut Created At " Date() " " Time()
pCmdLink.WorkingDirectory = LGetPath(pTargetPath)
pCmdLink.Save
End IF
End Sub

Set pArgs=Wscript.Arguments
If pArgs.Count = 0 Then '無參運行，復制自身到SendTo文件夾。

MsgBox "注意無參運行即執行安裝過程！" VBCRLF _
"安裝過程包括以下操作：" VBCRLF VBCRLF _
"1、在發送到目錄中建立該腳本的快捷方式；" VBCRLF _
"2、完成安裝后可通過發送到建立快捷方式；" VBCRLF _
"3、所有快捷命令可通過運行(WIN+R)執行。" VBCRLF
SysCmdPath = GetConfigPath
If SysCmdPath = "" Then WScript.Quit()

pCmd.RegWrite "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders\SysCmd", SysCmdPath, "REG_SZ"
'Path = pCmd.RegRead("HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Session Manager\Environment\Path")
Path = GetEnv("Path")

If Right(SysCmdPath, 1)="\" Then SysCmdPath = Left(SysCmdPath, Len(SysCmdPath)-1)
SysCmdPathPattern ="(;)?(" Replace(SysCmdPath, "\", "\\") ")(\\)?(;|$)"
If Not IsMatch(Path, SysCmdPathPattern) Then
Path = Path ";" SysCmdPath
SetEnv "Path", Path
End If

thisFile = WScript.ScriptFullName
IF thisFile>SysCmdPath "\" WScript.ScriptName Then
pFso.CopyFile thisFile, SysCmdPath "\"
thisFile = SysCmdPath "\" WScript.ScriptName
End IF

AddNewCmd "N系統命令", thisFile, pCmd.RegRead("HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders\SendTo")
'在右鍵菜單中增加創建當前文件或文件夾的系統快捷命令的菜單項
pCmd.RegWrite "HKEY_CLASSES_ROOT\*\shell\G創建系統命令\command\", "WScript.exe " thisFile " ""%1""", "REG_SZ"
pCmd.RegWrite "HKEY_CLASSES_ROOT\Directory\shell\G創建系統命令\command\", "WScript.exe " thisFile " ""%1""", "REG_SZ"
'在右鍵菜單中增加在當前路徑打開CMD窗口命令的菜單項
pCmd.RegWrite "HKEY_CLASSES_ROOT\*\shell\Q在此打開CMD\command\", "CMD /K PUSHD ""%1\\..""", "REG_SZ"
pCmd.RegWrite "HKEY_CLASSES_ROOT\Directory\shell\Q在此打開CMD\command\", "CMD /K PUSHD ""%1""", "REG_SZ"

'在右鍵菜單中增加在查找快捷方式位置的菜單項
pCmd.RegWrite "HKEY_CLASSES_ROOT\*\shell\W查找目標位置\command\", "WScript.exe " thisFile " S ""%1""", "REG_SZ"
pCmd.RegWrite "HKEY_CLASSES_ROOT\Directory\shell\W查找目標位置\command\", "WScript.exe " thisFile " S ""%1""", "REG_SZ"

AddNewCmd "Q", pCmd.RegRead("HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders\SysCmd"), pCmd.RegRead("HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders\SysCmd")
AddNewCmd "QC", thisFile, pCmd.RegRead("HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders\SysCmd")
MsgBox "安裝成功!"
ElseIf pArgs.Count = 1 Then
IF UCase(pArgs(0))="EDIT" Then '只有一個參數且為Edit時， 打開此腳本進行編輯。
pCmd.Run("Notepad.exe " WScript.ScriptFullName)
WScript.Quit()
ElseIF UCase(pArgs(0))="LIST" Then '只有一個參數且為List時， 列出所有已經建立的快捷方式和其對應的目標文件。
ResultFile=pCmd.RegRead("HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders\SysCmd") "\ListSysCmd.txt"
ListSysCmd ResultFile
pCmd.Run("Notepad.exe " ResultFile)
WScript.Quit()
Else '只有一個參數時， 默認處理方式是建立傳入的文件路徑的快捷方式。
pShortCutName=InputBox("請輸入該快捷方式的名字：", "創建快捷命令...", "")
IF pShortCutName="" Then WScript.Quit()
AddNewCmd pShortCutName, pArgs(0), pCmd.RegRead("HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders\SysCmd")
End IF
ElseIf pArgs.Count = 2 Then
IF UCase(pArgs(0))="S" Then '查找快捷方式目標文件位置
'判斷是否包括\，從右鍵菜單執行會直接傳遞目標地址，從快捷方式中需要組合快捷方式的地址。
IF Instr(pArgs(1), "\") > 0 And Instr(pArgs(1), ".lnk") = 0 Then '從右鍵菜單執行
pCmd.Run("Explorer.exe /select, " pArgs(1))
Else '從命令行執行
IF Instr(pArgs(1), "\") > 0 Then '全路徑.lnk路徑
linkPath=pArgs(1)
Else
linkPath=pCmd.RegRead("HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders\SysCmd") "\" pArgs(1) ".lnk"
End IF
linkPath=Replace(linkPath, "\", "\\")
Set pFiles = pWMIService.ExecQuery("Select * From Win32_ShortcutFile WHERE Name = " "'" linkPath "'")
For Each pFile in pFiles
pCmd.Run("Explorer.exe /n, /select, " pFile.Target)
Next
End IF
Else
'FileLocation, ShortCutName
pShortCutName=pArgs(1)
AddNewCmd pShortCutName, pArgs(0), pCmd.RegRead("HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders\SysCmd")
End IF
End If